The correct installation method and operation precautions of the laser marking machine!

★ Operating environment Do not place the device in a place with high humidity, dust or steam. <This may cause a fire or electric shock. >　　

　　★ Do not expose the device to extremely high temperatures, especially where the device is exposed to direct sunlight or near a heater. <This may cause fire or deterioration of parts or equipment surfaces. >　　

　　★ When carrying and maintaining, disconnect the power plug from the socket. <This may cause electric shock. >　　

　　★ Please disconnect the power plug when not using the device for a long time. <This may cause a fire>　　

　　★ When moving the device, please remove the power cord and other cables. <This may cause equipment damage, fire, personal injury, or electric shock. >　　

　　★ Before disconnecting the power cord and other cables, be sure to turn off the power. <This may cause equipment damage or electric shock. >　　

　　★ Do not hold the cable when disconnecting the power cord, hold the plug. <This may cause a fire or electric shock. >　　

　　★ Do not disconnect the power plug with wet hands. <This may cause electric shock. >　　

　　★ Do not let the power cord near the heater. <This may cause a fire or electric shock. >　　

　　★ Do not move the device with any objects placed on it. <This may cause injury. >　　

　　★ Do not place any objects on the device. <This may cause a fire or electric shock. >　　

　　★ Do not close the ventilation holes. <This may cause equipment damage or fire. >　　

　　★ Please turn off the power when cleaning the lens. <This may cause injury. >

Install exhaust and air purifiers, because laser marking certain materials may produce toxic fumes or particles, and dust in the equipment may cause malfunctions or fires. Please turn off the power when cleaning the lens, otherwise it may cause harm to the human body. Please do not put your hands in the laser marking area.

      In addition, you need to prepare protective glasses with an optical density of 5 or more and a wavelength of 1064 nm (note that the protective glasses will degrade over time, and it is recommended to replace them regularly). Do not modify, heat, or apply excessive force to bend, Twisting or stretching, or placing heavy objects on the fiber optic cable may cause damage to the fiber optic cable. The minimum bending radius of the fiber optic cable is 150 mm or more. The bending, squeezing, stretching and heating of the fiber optic cable will not only cause failures , And the performance of the instrument cannot be maintained.