Carbon dioxide laser marking machine environmentally friendly processing wood laser marking

Nowadays, laser marking machines are more and more commonly used in various industries. As a new type of machine equipment, it mainly includes laser cutting machines, laser marking machines, laser coding machines, and optical brazing laser marking machines. , Laser welding machine, etc. A disruptive reform of laser equipment, it can realize standardized and intelligent production and processing, it is energy-saving, ecological and environmentally friendly, and has a high level of intelligence. It can also realize remote control and actual operation, which will greatly reduce labor and enhance the office environment. And greatly improved productivity and product grades, and promoted the development and progress of new technologies.

    The carbon dioxide laser marking machine uses a laser beam to engrave persistent marks on the surface of various objects, while the carbon dioxide laser marking machine is an intelligent automation technology that integrates lasers, computers, and machinery and equipment. Not harsh, the pros and cons of the machinery and equipment environment will directly affect the performance index and productivity of the machinery and equipment and the service life of the machinery and equipment.

    Therefore, in the actual operation of the laser marking machine, the environment must be treated strictly. What kind of environment is good for the carbon dioxide laser marking machine:

     1. The cooling method of individual laser marking machines is usually non-condensing water-cooled, such as semiconductor laser marking machines. Therefore, to ensure the quality of the cooling circulating water, mineral water or distilled water can be used directly, and the cooling circulating water should be replaced regularly.

     2. The environment of the carbon dioxide laser marking machine should be indoors, the temperature is between 20℃-30℃, and the ambient humidity is 30%-80%, which can make the laser equipment perform production and processing operations in an excellent state.

     3. The power supply energy and wire of the carbon dioxide laser marking machine must meet the requirements of the machine and equipment, and the fluctuation of the power supply must not exceed 10%, and it must be connected to the ground wire.

Carbon dioxide laser is mainly different in wavelength and YAG equipment, so it absorbs non-metal materials relatively well. If you just simply mark or engrave on the wood, 10W to 100W will do. If you want to make large-format, thick graphics, you must use high-power carbon dioxide, such as 2000W power.

      In the field of beverages, carbon dioxide laser marking machine engraving on plywood is not much different from engraving on wood. There is only one point to be aware of, and the depth of engraving should not be too deep. The edges of the cut plywood will be as black as wood, depending on which wood is used to make the plywood.

      Wood is the commonly used laser processing raw material so far. It is easier to engrave and cut. Light-colored wood, such as birch, cherry or maple, is easily vaporized by the laser, so it is more suitable for engraving. Each kind of wood has its own unique characteristics, and some are denser, such as hardwood, which requires greater laser power when engraving or cutting. It is recommended that the engraving characteristics be discussed first before engraving unfamiliar wood.